Is My Sliding Screen Door Suitable for the Mesh Patio Pet Door?

Before purchasing a Mesh Patio Pet Door, it’s essential to check your sliding screen door setup to ensure a proper fit. A few quick checks can help you avoid installation issues.

1. Check for Locking Hardware in the Track

• Some sliding screen doors have locking hardware or latches installed inside the track, often near the handle.

• This can prevent the Mesh Patio Pet Door from fitting correctly.

• Look for any screws or fittings in the track where the pet door would sit.

2. If Locking Hardware Is Present

• In most cases, you can unscrew and remove the hardware, storing it safely for later use.

• Keep in mind that removing it will disable your screen door’s current lock. You will still be able to lock your glass sliding door.

3. If You Don’t Want to Remove Hardware

• Consider our Glass Patio Pet Door, which locks directly to your glass sliding door and leaves your screen door hardware untouched.

4. Quick Measurement Checklist

Before purchase, check these three things:

Track Width –  Minimum 17.5 mm (0.7")

(When both sliding panels are measured together, the product is 35 mm wide. However, the pet door only sits on one panel, so the usable track width is half of this.)

Clear Track – No locks, screws, or fittings blocking the track

Height Range – Confirm your door height fits within the Mesh Patio Pet Door’s adjustable range (see product specs) or Extension Height Guide for Mesh Patio Pet Door

Clearance – Ensure there is still enough space to comfortably walk through the sliding door after the pet door is installed. 

Tip: To test clearance before buying, slide your door open by the reduced width that would remain once the pet door is installed. Walk through and see if it feels comfortable.