How do I adjust the flap on my Deluxe Aluminium Pet Door?

If your pet door is not sitting centre or you'd like to raise the height to lessen the magnet strength, follow these steps below:

Deluxe Aluminium Pet Door (Version 2)

1. Remove the screws on the flap holder.
2. Re-position flap.
3. Tighten the screws.

Deluxe Aluminium Pet Door (Version 1)

1. Remove the screws at the top of the frame securing the flap.
2. Using a flathead screwdriver, carefully pry open the metal strip that clasps the flap in place.
3. Re-position the flap higher up or lower down in the clamp teeth.
4. Push down the strip to secure it, and tighten the screws.

Tip: It may be easier to remove the frame section with the flap attached and replace the flap on a flat surface.

How to differentiate between the Deluxe Aluminium (V1) and (V2) Pet Door