Deluxe Aluminium - General - How do I adjust the flap?

If your pet door is not sitting centre or you'd like to raise the height to lessen the magnet strength, follow these steps below:

V1 Deluxe Aluminium

1. Remove the screws at the top of the frame securing the flap.
2. Using a flathead screwdriver, carefully pry open the metal strip that clasps the flap in place.
3. Re-position the flap higher up or lower down in the clamp teeth.
4. Push down the strip to secure it, and tighten the screws.

Tip: It may be easier to remove the frame section with the flap attached and replace the flap on a flat surface.

V2 Deluxe Aluminium

1. Remove the screws on the flap holder.
2. Re-position flap.
3. Tighten the screws.

Deluxe Aluminium - General - What's The Difference Between V1 And V2 Pet Doors?