Ultra Clear - Spare Parts - How Do I Replace The Locking Clips?

This article will guide you through replacing Locking Clips for the Ultra Clear Pet Door. 

Tools Required:

• Flat Head Screwdriver

Steps to Replace the Locking Clips:

1. Remove the frame (the section with the locking clips attached) from its installed location.

2. Insert the end of a Flat Head Screwdriver between the back of the clip and the frame.

3. Gently twist the screwdriver to pry the back side of the clip away from the frame and remove it.

4. Before installing the new clips, make sure they are oriented correctly - the clips should face opposite directions.

5. Insert the new clips into the frame and press the two parts together firmly to lock them into place.

Troubleshooting Tip:
If the locking clips feel loose after installation, double-check that they are positioned correctly before pressing them together. Misaligned clips can cause a poor fit.